合用于搪玻璃、衬氟塔器内件撑持用处。撑持环打仗物料立体均为PTFE材质，经由过程对聚四氟乙烯板材表面停止奈钠处置工艺并将其加热后经由过程工装装备使其聚四氟乙烯板材平均包覆、慎密粘合于钢坯表面面，耐侵蚀性完整由PTFE材质固有特征保障，同时接纳充足的钢还厚度保障其利用的刚度撑持性和利用寿命。产物成型后表面面平坦、棱角处圆角过渡，滑腻不易粘料，保障了拆卸于装备后的密封靠得住性和易洁净性。衬层厚度经由过程国度规范高电压电火花实验检测，保障宁静性、耐费用。

     It is suitable for supporting the internals of glass lined / Teflon lined column. The plane surface of the support nngcontacting with the medium is made of PTFE. After its surface is treated with Natrium treatment process and heated, thePTFE plate is evenly coated and tightly bonded to the outer surface of billet through tooling equipment. The corrosionresistance is completely guaranteed by the inherent characteristics of PTFE material. At the same time, sufficient billetthickness is adopted to ensure its stiffness, supportiveness and service life. After the product is formed, its outer surfaceis flat, the corners are rounded, smooth and not easy to stick, which ensures the sealing reliability and easy clean ling afterassembly in the equipment. The thickness of the lining layer is tested by the national standard high voltage spark test to ensure safety and durability.